Please contact us if you are interested in this telescope.
Enjoy exceptional optical and tracking performance for astrophotography, or research, with the CDK400 package! Includes a CDK17 optical tube and L-500 mount.
- CDK17 optical tube:
- f/6.8 and 2939mm focal length
- No coma, no off-axis astigmatism, and no field curvature.
- Pinpoint stars across a 70mm image circle.
- Rock solid fused silica mirrors with low thermal expansion.
- Carbon fiber optical tube assembly for rigidity and fast cooling.
- Simple secondary mirror collimation thanks to the fixed primary mirror.
- L-500 direct drive mount:
- Zero periodic error, zero backlash, and minimal maintenance due to the lack of gears.
- Slew speeds up to 50 degrees/sec for satellite tracking and fast target acquisition.
- Sidereal tracking accuracy of < 0.30 arcseconds RMS over 5 minutes.
- High resolution optical encoders on both axes for precision feedback.
- Can be installed in either equatorial, or alt/az configuration.
- Includes PWI4 software (ASCOM compliant) for mount control.
The PlaneWave Instruments CDK17 is a 17 inch (0.43 m) f/6.8 Corrected Dall-Kirkham Astrograph telescope. The CDK17 has a dual carbon-fiber truss design, with 3 cooling fans ejecting air from the back of the telescope, and 4 fans blowing across the boundary layer of the mirror’s surface. The CDK17 covers a 70 mm field of view without any field curvature, off-axis coma, or astigmatism. The instrument weight is 94 lbs (43 kg) and comes standard with a backplate retaining ring ready to accept the focuser of your choice.
All CDK17 telescopes come with fused silica primary and secondary mirrors.
The L-Series combines versatility, simplicity and affordability by combining all the technology of our Observatory class telescopes into a compact stand-alone mount. In its Alt/Az configuration, it is considerably more compact than its equatorial counterpart, allowing a larger telescope to fit in a smaller enclosure. The mass it takes to make a rigid alt/az mount is substantially less, leading to cost savings. Unlike German Equatorial mounts, there are no meridian flips to deal with, and no large protruding counterweights to create a dangerous hazard in a public observatory. Alt/Az is more intuitive to use and no polar alignment is needed. Besides, it is the way the pros do it!
L-Series Mount Features:
- Direct-drive motors on each axis for smooth, fast, and virtually silent movement of the telescope
- Slew speeds up to 50 degrees per second
- High-resolution encoders on each axis for precise positioning
- Zero backlash
- Zero periodic error
- PointXP mount modelling software
- Enclosed electronics
- Through the mount cabling
|Type||Alt-Azimuth / Equatorial Direct Drive Mount|
|Weight||110 lbs (50kg)|
|Component Weights||Azimuth Base – 40 lbs, Fork Arm – 70 lbs|
|Max. Load Capacity||100 lbs (45 kg)|
|Latitude Range||0 to 90 degrees, Northern and Southern hemispheres|
|Cable Management||Equipment cables can be wired through mount|
|Control Electronics||PlaneWave Interface dual axis telescope control|
|User Interface||PlaneWave Interface 4 (PWI4) Control Software with integrated PointXP mount modeling software|
|Homing Sensors||Home position sensors are included allowing the mount can find its home position on power up.|
|Slew Rate||20 degrees per second (standard); 50 degrees per second (maximum), both axes|
|Power Requirement||Accepts 120 VAC. Supplied with 12VDC 15A Regulated Power Adapter|
|Aperture||17 inch (432 mm)|
|Focal Length||2939 mm (115.71 inch)|
|Central Obstruction||23.7% by surface area; 48.6% of the Primary Mirror Diameter|
|Back Focus from Mounting Surface||10.32 inch (262.33 mm)|
|Weight||106 lbs (48 kg)|
|Optimal Field of View||70mm Image Circle|
|Motor Control||Industrial grade brushless motor control system and built in electronics|
|Motor – Azimuth and Altitude||Direct Drive 3 Phase Axial-Flux Torque Motors|
|Encoder – Azimuth and Altitude||152mm stainless steel encoder ring with reader built into the azimuth and altitude axes. 18,880,000 counts per revolution (0.069 arcsecond resolution).|
|Motor Torque||Approximately 20 ft-lbs continuous; 50 ft-lbs peak|
|Drive Electronics||Industrial grade, off-the-shelf brushless motor drives for each axis with custom designed interface card|
|Telescope Control Software||PlaneWave Interface (PWI4). Incorporates PointXP mount modeling software by Dave Rowe. Provides HTTP and ASCOM control interfaces.|
|Pointing Accuracy||<10 arcsecond RMS with PointXP Model|
2 arcseconds at sidereal velocity
< 0.3 arcseconds over a 5 minute period at sidereal velocity
|System Natural Frequency||10 Hz or greater|
|Heating elements for dew prevention||The heating pads on the primary and secondary mirror require the 600195 Delta-T controller sold separately|
|OTA Cover||To protect the primary mirror and inside of the optical tube|
|Flashdrive||Contains software and instructions for collimation and spacing the primary to secondary mirror|
|Hardware||Six 3/8-16 x 1/4″ socket head cap screws to bolt the mount to the pier, or wedge
Six 3/8-16 x 1/4″ washers
One extended length shoulder bolt for RA axis to EQ wedge alignment
|One 16′ USB cable||To connect the mount to the observatory control computer|
|One 120VAC power cable||To provide power to the mount|
|Standard Allen Key set||For tightening bolts used on the mount|
|Flashdrive||Contains PWI4 software for mount control and instructions for installation|
|Gamepad||Used for control of the mount tracking speeds for visual observing|
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.